What to do if the carton of the automatic sealing machine is stuck
The carton sealing machine is one of the indispensable packaging machinery in the enterprise's downstream packaging equipment. The automatic carton sealing machine can be used as a stand-alone machine or in conjunction with an automated conveyor line. It can save manpower and help enterprises save unnecessary expenses, and let the machine help enterprises Fast, high-speed, and safe improvement of work efficiency. It is inevitable that there will be some minor faults in daily use. The sealing machine is no exception. The editor of Dingye will introduce you to how to solve the card box of the automatic sealing machine.
1. The width or height adjustment is too small
The automatic carton sealing machine manually adjusts the corresponding width and height when conveying the carton, but during the adjustment process, the operator is not familiar with the machine or there is an error in the operation, which will cause the phenomenon of jams.
Solution: The best way is to put the carton on the working table of the sealing machine, and then adjust the contrast to ensure the length of the conveyor.
2. The carton is too light to pass through the movement
If you want to fully understand the performance characteristics of the equipment, you should fully understand the advantages and disadvantages of its performance or directly talk about the working principle of the sealing machine (for detailed knowledge, please read this article). The principle of the sealing tape of the automatic sealing machine is The carton is pressed by the sealing machine and the carton hits the belt guide roller during the conveying process, so that the tape can be sealed to the carton. However, in this process, if the carton is too light, it will not be able to hit the belt guide roller, so it will directly lead to the occurrence of jams.
3. The tape is not cut
This will cause the cutter to be not sharp and cut the tape continuously, and the continuous tape cutting will cause the carton to be stuck in the sealing machine and cannot be conveyed.
Solution: Clean the cutter regularly or replace the cutter to ensure the sharpness of the cutter. (After the automatic sealing machine is used for a period of time, a lot of tape debris and dust will stick to the cutter, so it needs to be cleaned in time).