All Categories

COMPANY NEWS

Home>NEWS>COMPANY NEWS

The use and maintenance skills of automatic folding and sealing machine

Time : 2020-06-10 Hits : 32

Automatic Folding and Sealing Machine is also called Folding Machine or Folding and Sealing Machine. It is a box sealing machine that can automatically fold the upper lid of the carton. It is a sealing device that small and medium-sized enterprises prefer. The machine adopts instant adhesive tape to seal the carton, which is economical, fast and easy to adjust. It can complete the upper and lower sealing actions at one time. Printing tape can also be used to improve the product image. It is an ideal choice for enterprise automatic packaging. Folding and sealing machine and other models can also be combined into an I-shaped sealing machine combination; after the carton is sealed up and down by the front folding and sealing machine, it enters the 90-degree corner machine, and the box is pushed into the corner sealing machine by the push plate; The upper and lower four corners are sealed by the corner sealing machine, and the perfect I-shaped sealing is finally achieved; the upper and lower corners of the carton are automatically sealed and smoothed at the same time, which is fast and stable. It can be used in conjunction with an automated packaging line. It is a manufacturer’s A packaging machine is required.

As the operator of the sealing machine, you should have a good understanding of the maintenance and maintenance of the automatic sealing machine and the folding and sealing machine. It will help you understand the sealing machine. AUSIM packaging equipment summarizes the five common knowledge:

Replace the sealing machine blade:
Loosen the nut of the sealing machine, take out the old blade, replace it with a new blade, replace it with a new blade and then tighten the nut.

Replace the conveyor belt of the sealing machine:
To replace the conveyor belt of the side transmission device, first loosen the two fixing nuts on the belt cover and the adjustment bolts in front of the belt seat, remove the belt cover, and then remove the old belt and replace it with a new one. After reinstalling, adjust the tension of the two conveyor belts to make The two conveyor belts are locked after the tension is the same.

Sealing machine cleaning and lubrication:
In order to make the machine run normally, the friction surfaces of all active parts on the automatic folding and sealing machine should be lubricated with 30# oil once a week.

Regularly clean the oil stains of the sealing machine:
Although the sealing machine itself does not need to be refueled, some important parts of the sealing machine need to be added with lubricating oil, such as the transmission part. The oil will be contaminated with dust during the working process of the machine, and the oil will also follow the personnel. The operation is touched and scratched to other places, so it is very necessary for the operator to clean the oil regularly.

Regularly check the use of vulnerable parts of the sealing machine:
Vulnerable parts of the sealing machine refer to the parts that are easy to wear and damage during the use of the machine. Therefore, the operator should pay more attention to these parts during the use process, and appropriate spare parts should be spared to prevent the damage of the parts from affecting production. Effectively avoid production losses.


+86 021 22819114 [email protected]