All Categories

COMPANY NEWS

Home>NEWS>COMPANY NEWS

How to debug the automatic carton erector machine for the first time?

Time : 2022-01-05 Hits : 13

The equipment needs to be debugged before use, and the automatic carton erector machine is no exception. Many people who use it for the first time don't know how to debug, but it is not difficult. The following editor will share with you the debugging method of the automatic unpacking machine:

 

automatic carton erector machine

1. Adjust the hopper bin.

First take a carton and place it in the hopper to see if the width and height are suitable. If it is not suitable, it needs to be adjusted according to the size of the carton. If the height is not enough, the height of the hopper bin itself needs to be raised to match the height of the carton so that it can rest on the upper dial of the automatic carton erector machine.

 

 

2. Adjust the position of the suction cup. 

When the hopper bin is adjusted, the position of the carton is relatively fixed. At this time, you need to adjust the position of the suction cup of the automatic carton erector machine. The suction cup of the automatic carton erector machine must suck the front of the carton, not at the crease or the top cover of the carton.

 

3. Adjust the height of the upper cover. 

Fold the bottom of the carton and place it at the discharge port. Adjust the height of the top cover of the opener according to the height of the carton. The height adjustment is suitable to press the carton but not affect the conveying of the carton.

 

4. Adjust the belt width. 

Place the folded carton in the middle of the belt, and manually adjust the width of the belt. The width of the two belts can clamp the carton but can drive the carton.

 

After the above steps are adjusted, first take a carton to perform step-by-step actions, observe whether each movement is smooth, and fine-tune the steps that are not smooth until all the movements are smooth, and then put a carton for continuous movement. When a carton can be unpacked smoothly, fill the hopper bin for batch testing. If there is no problem, the entire adjustment work of the automatic carton erector machine is basically completed.

 

Automatic carton erector machine is an important equipment used for packing and packing in enterprise automated production operations. The equipment has stable performance, high efficiency, and the sealing and opening effect is beautiful and firm, so more and more enterprises begin to use it. The main function of the automatic carton erector machine is to open the flat carton into shape, and seal the bottom of the carton with tape, which is used for packaging on the mass production line. It can be equipped with an automatic cartoning machine and a carton sealing machine. If you have not used the automatic carton erector machine, please read this article carefully, it will be helpful to your future use.


+86 17602113884 [email protected]