All Categories

COMPANY NEWS

Home>NEWS>COMPANY NEWS

Eight precautions for shrink packing machine maintenance 2021-09-02

Time : 2021-09-02 Hits : 14

Shrink packing machine is an indispensable equipment for many companies' product packaging. It can not only bring the packaging effect of the company, but also reduce the packaging cost and create more profits for the company; it is not only economical and environmentally friendly, but also can better protect the product. It is precisely because the shrink packing machine has these important points for the development of the enterprise, so the shrink packing machine is very popular among enterprises, and the sales volume rises again and again. shrink wrap work .

Since the shrink packing machine plays an important role in the production and development of the enterprise, it is also very necessary for users to strengthen the understanding of the heat shrinking machine and do a good job in the later use and maintenance of the heat shrinking machine. This can not only ensure the user's production, but also better improve the performance of the heat shrink machine and extend the service life of the heat shrink machine. To this end, we have summarized the following points based on our own experience for everyone to discuss and learn. shrink wrap work .

shrink packing machine

1. Since the power of the heat shrink machine is relatively large, in the control of the power supply, it is necessary to ensure that the input power is higher than the number marked on the name plate of the heat shrink machine, but it is necessary to pay attention to strengthening the electronic components of the heat shrink machine And the protection of the line. shrink wrap work.

2. The ground wire connection work of the heat shrink machine must be done well to ensure the safety of the staff.

3. Because each heat shrink machine comes with a section of cable, you need to pay attention to the power identification symbol on the line to ensure correct operation.shrink wrap machine for sale.

4. The rated voltage of the heat shrink machine is 380 volts, so it needs to be connected to the neutral line, and the standard three-phase four-wire system is set.shrink wrap machine for sale.

5. During the installation process, the position of the heat shrinking machine should be ensured to be stable, so as to ensure the life of the heating tube of the heat shrinking machine. If the conveyor is forgotten, the installation offset will cause the conveyor belt to deviate from the center.shrink wrap machine for sale.

6.  The heat shrinking machine should be inspected regularly. If it is used for more than a month, all aspects must be inspected, and some aging parts must be replaced even if it is used.

7. In the working process of the heat shrinking machine, the operator should try to avoid contact with the running part of the machine, especially the inside of the heat shrinking machine, to avoid burns.

8. After finishing the packaging operation, first turn on the switch, let the heat shrink machine continue to run for about ten minutes, and then cut off the power.

 

I hope that the 8 precautions we have summarized will help you better use and maintain the heat shrinking machine.

image    image    image

+86 17602113884 [email protected]